Sunday, June 27, 2010

Firecracker 250 Race Report

We had a blast at the Firecracker 250! EDR and Rock and Roll put on a great event in Odessa. Jeremy, Becca, Ben and I rolled out with the 5 Unlimited around 4PM. Matt Schwoerer and Matt "Goosette" Little were in the long travel Tacoma. We got to Odessa just after the sun set, made camp and called it a night. Tony, Ted and Chris brought the 7S truck and showed up at 5AM.

Friday morning we teched and registered at the Holiday Inn, picked up Phil, then headed to the track. Ted and Matt took the first lap in the race truck. That's when we found our GPS was no longer with us. We even tried to upload the course from another racer. We made the call to have every driver take a lap to get familiar with the course. Chris and Goosette took it out. That's about when Jeremy came back with Will and Eliot from the airport. Ben and I drove the truck to finish the day out. Somewhere in that time, Oren and Natalia showed up. Andy and Dave took the 5 car and did one lap with some minor electrical hiccups.

The course was pretty fast and had a ton of silt. 50 mile laps of loose sand, wash outs, tight trails lined with cedar and a sprinkling of football sized rocks made up the course. We somehow missed the pre-race dinner, but made the driver meeting an hour before the race. Unfortunately, there were no other class 7S (V6 mini trucks) besides us. So we went up a class and raced against the full size V8 trucks in class 8.

I took the first lap with Matt S. We started towards the end of the 8 truck lineup. I drove a bit aggressively to get through the traffic and out of all the dust. After landing hard on a jump, part of the lower hood mount broke and held on for dear life until we pitted. By mile 20, we were in third. After mile 35, we had first place by a good lead. In to the pits we went, after I blew a big turn where there were a ton of spectators. The hood was removed and our pit was pretty clean... Just a minute and a half for a full driver change and look over the truck. A Bronco and an Ultra 4 passed us in the pits.

Ted jumped in and Matt S stayed in the co-driver seat for lap 2. Around mile 3, the truck dug deep in to the silt and buried itself to the frame. The crew team jumped in to Tony's F350, raced across the mid field and extracted the Tacoma. Onward they went. On lap 3, they blew a tire. It was completely shredded. There was a problem with the jack that put the car down for 15 minutes before the spare was swapped. Around mile 34, the brakes went to the floor. Ted and Matt pulled off the course, and pinched off the broken stainless brake line. We scrounged up the parts to make the repair and they limped it back.

The truck came back in to the pits and the crew went to it. Gas, driver change, front end shake down and lug nut torquing. I dove under the truck and swapped out the stainless line. Tony bled the brakes. Off they went... another 15 minute delay in the pits. Despite our hardships, Chris and Goosette powered through and had a flawless 2 laps. They closed the gap between us and first place down to 15 minutes when the Krawltex Tacoma crossed the finished line. Second place finish. Not too shabby for a V6 truck running in class 8!

Unfortunately, our 5 car had a slew of problems that couldn't be fixed out on the course. At mile 5 of lap 1, the ignition system shit the bed. After changing plugs, wires, cap , rotor, and an ignition computer chip, the 5 car finally got back on course. After the first pite, we splashed it with gas and sent them on their way. 20 miles later, the nut holding the alternator pulley decided to fly off in to the woods, shredding the belt and taking the pulley with it. Dave managed to find the pulley but we had to source another nut. The correct fastener is a conical 14mm. All we could find was a non-tapered nut. After an hour of figuring out how to get to the 5 car, the crew patched the car and limped it back to the pits. Back to repair and prep work for both vehicles.

Krawltex is planning to run the Best in the Desert Series Vegas to Reno race in August. In the coming months, we will be doing a full prep, swapping glass, rewiring, and freshening up the interior. The 5 car will be going under prep for the Texoma day/night race in September.

Saturday, June 5, 2010

Krawltex 4th Anniversary Party June 12th

It's that time of year again. Thanks to every one that has helped us along the way! Krawltex is very excited to be in our 4th year of business. Come by the shop on saturday, June 12th for some free BBQ, refreshments and live music. Festivities start at 11:30am. Check out the new digs if you haven't made it over to the new shop yet. We will have a great rockabilly band named the Tyburn Jig playing around 1PM. Think Johnny Cash meets Dick Dale and Punk Rock all in one. They even have a lap steel in their company. We will have the race car on display as well as other project vehicles. You may want to bring a folding chair. Other than that, please join us in celebrating 4 great years in the off road community!

Thursday, June 3, 2010

Ed's Long Travel 4runner pics




On Ed's 05 Toyota 4runnner: 3" Stage 5 Icon long travel suspension... adjustable coilovers with remote reservoirs, billet aluminum upper control arms with heimed ends, All-pro heimed swaybar links and tie rod ends, Light Racing Jounce air bumps, Total Chaos lower control arm skid plates, 3" rear Icon coil springs, remote reservoir shocks, lower shock mount skids

Thursday, May 27, 2010

Monday, May 17, 2010

Lakeline Hooters Truck Show May 18TH

Very last minute, but they are having a little truck show get together at the Lakeline Hooters tomorrow, May 18th at 6PM. drink specials all night long. We'll bring out Matt's Prerunner Tacoma, Ed's Ultimate FJ Project and my Superduty. Come one come all, especially if you are repping the shop. I think 4WP sponsored this thing.

Wednesday, May 12, 2010

The shop has been pretty busy. Last week, we finished the 12V Suburban for Jake. Matt rebuilt the brakelines on Billy's F250. While Ted and I were gone racing, Matt and Chris also swapped a 3.4L long block in Steven's T100.

This week has been even more productive. Matt Little with the silver 06 Tacoma is interning with us this summer and giving an all around hand.

So far, Chris has installed an Icon mid travel kit on Ed's 05 4runner (adjustable resi coilovers, billet upper control arms, TC lower control arm skids, Light Racing bump stops, Allpro heimed steering and swaybar ends, and Spidertrax wheel spacers. The rear coils and shocks will go on later in the week. Currently, he is doing an adjustable Bilstein strut on Matt's Tundra.

Ted is working hard on linking Eric and Andrew's Tahoe. It should be sitting on a Dodge front end and 4 link suspension by the end of this week.

Matt is in the middle of an AW4 swap in Patrick's new TJ, as well as some other maintenance with a Dodge 2500 master cylinder conversion.

For the rest of the week, we have an XJ for some frame stiffeneing and cage work. Jason's 2500 Dodge is coming in for some front end steering and hub maintenance. Next week we will begin the power mods on Ed's FJcruiser... APR X1 fule manangement, Doug Thorley long tube headers, 7th injector, high flow fuwl pump, and smaller supercharger pulley. Then it is off to hand building an exhaust around a custom crossmember to give it a belly up skid, as well as the start to the interior cage. Kyle's Xterra will be in for sliders and a 2" lift before he heads to Moab for vacation. We will be in the middle of swapping an AW4 for Chris (SirGcal) in his TJ and hope to have it done by the end of next week. During all of this, we will be prepping 5099 for the race in June, as well as hammering out Ted's YJ for the Katemcy Memorial Day run.

Sunday, May 9, 2010

SNORE Dusty Times 250 Race Report

This weekend has been awesome! We met Ted, Nick and Bill Moncure at the pits with Chris Livingston. After registration at the Knotty Pines Bar/Casino... I use the term casino very loosely, we got the truck through tech in less than an hour. I was hoping for a bigger Contingency Parade/Vendor Row, but what can you do. Shortly after, we had lasagna around a camp fire and shot the bull. Ted Moncure is the Product Development Manager for TRD. He actually designed the 4.0 Supercharger that we just installed on Ed Berrera's FJCruiser. Nick is the national sales manager for MBRP exhaust. Looks like Krawltex will be able to offer some great deals on both those product lines.

So in the morning, I hopped behind the wheel with Chris Livingston as my co-driver. He was a pro and eventually took over shifting as well as navigating for me. Unfortunately, we did not pre-run so we had to run about 70% to capture the course for everyone else. Luckily, SNORE did an incredible job marking the course with orange arrows. I slow paced it in the beginning to get a feel of the car. The steering has a 2:1 quick steer box and the brake bias had been set up for Baja, with more brake to the rear allowing the ass to slide. Unfortunately, I blew a turn and got the truck buried to the axle in a silt bed... avoiding the tree on my left and the ranch gate on the right. We dug for a while, then a back hoe came to our rescue. On we went, wasting about 15 minutes. When we hit the third water crossing, everything got soaked. Chris managed to turn the squelch down on the PA system and we motored through. The fourth water crossing was deeper, probably up to the rocker. This in turn soaked the ignition, but it cleared up after 10 miles of limping. Once I got a little more familiar with the steering in the twisty, technical section we opened it up and let her run.

The car sounds great with the Bassani exhaust. The rpms were solid all the way to the 6000 red line. The BFG Projects were unstoppable, besides my little driver error stuckage. 75 was fast as I felt comfortable taking the car. Later I would learn about the brake bias, which would have let me control it better on the high speed sweepers and rollers. But no big deal. Chris and I were still getting to trust each other, and I was just trying to cleanly finish my lap without wadding the car up. SNORE put on a great race with at least 40 miles of continuous high speed sections. A class 1 was on our ass and tried to take us for a ride, despite me pulling over. But such is racing. Like most hot head 1 car drivers, I don't think he finished.

After the first fire road section, it was a twisty section around a mountain top, through the trees, and on top of a mesa where one could stare all around the mountain valley... at 70 mph. Parts of it were very similar to rally racing terrain. But it also reminds me of the area around Mike's Sky Ranch in Baja. The view was incredible. We got through that section and then the last high speed. Some where amidst all of this, Chris and I were able to fall in to second place. The last 5 miles were absolute hell on a rookie driver. It started with a 1/4 mile of knee high whoops, followed by the next section of uphill whoops in a silt bed. I was able to feather the throttle and get us through it. By the way, the Toyota is 2wd. If you have ever heard of the infamous goat trail in Mexico, that's what the next section was similar to. Loose, rocky and off camper like a Jeep trail. I took the Toyota up and down the back bone of a mountain. The trail was a truck width. If you fell off the side, it would be a very bad day. At the bottom of the hill was the entrance to the pits.

I hopped out and Nick took the wheel with Ted (our Ted) as co-driver. Lap 2, they ripped it. Nick set up the brake bias, they were able to bypass a section of the water crossing, and they could fly now having GPS data. Of course, driver experience certainly helped. They were able to close the 15 minute gap between us and first place by the time they were charging down the main hill in to the pits.

Lap 3 was a driver change, no fuel. Ted Moncure hopped in the driver's seat and I took the other. We got through the first silt bed that had by now, been knocked way down from all the trophy trucks and 1 cars. At the fourth water crossing, we completely shorted the communications. We could talk to each other, but couldn't relay back to the pits. In the midle of all this, we let a truck pass. As soon as we did, we realized that was first in our class. Out of the pits, we had the hole shot but weren't aware of it. We were going to spend lap 3 realing him in. I looked over at Ted and said, "Well, I guess now we have a race." It was catch up time. We road his ass for the next 60 miles, eating a dust cloud you couldn't see the end of your hood through. Luckily, I had driven the course before. We were definitely using the force and the GPS blindly, through some of the turns. When we got to the high speed section, we made our move on the Ranger with the Icelinger race motor. It was wide open head to head. We road his bumper blaring on the horn. He blocked for several miles. We tried to pass on the high left several times until the road narrowed just to two car lengths wide. So we took him for a ride. Never bumped somebody at 75 mph, but it was text book. Ted knocked the Ranger's driver rear bed side with the front passenger corner of the Tacoma. Fiberglass and our head light went every where. It must have rattled his cage, because when we finished the race 20 miles later, the Ranger was 10 minutes behind us.

Krawltex Motorsports and Long Beach Racers won the Dusty Times 250 in Class 7S

Cam